Fuel transfer pump selection Guide

A fuel transfer pump is a device used to transport fuel from one location to another. Typically, this pump is used to transfer fuel from the storage container to the vehicle’s fuel tank.

There are many types of fuel transfer pumps on the market, so it can be challenging for consumers to choose the right fuel transfer pump. There are many factors to consider in choosing the right fuel transfer pump, and here are some of the key factors for reference.

Fuel type

There are many types of fuels used in daily life, including diesel, gasoline and Adblue. Because these fuels have different chemical properties, the materials used in the pumps to deliver them will also be different. For example, gasoline transmission pumps need to be explosion-proof to ensure safe use. The part of the transfer pump used for Adblue that comes into contact with the fluid must be made of stainless steel or plastic to prevent corrosion.

Velocity of flow

Flow rate is an important factor to consider before purchasing a fuel transfer pump. The flow rate of the fuel pump refers to the amount of fuel passing through the hose per unit time when the pump is turned on. Flow rates are usually measured in liters per minute (LPM) or gallons per minute (GPM). Depending on the size of the vehicle and the capacity of the fuel tank, it is crucial to select a fuel transfer pump with the right flow rate. Too low a flow rate can result in too long a refueling time, while too high a flow rate can cause overflow or foam problems. Therefore, choose carefully.

40LPM or 60LPM

The 40LPM and 60LPM flow rates are suitable for small vehicles such as cars, trucks, forklifts and small construction vehicles. However, 60LPM fuel pumps are usually more expensive than 40LPM pumps.

80LPM

The 80LPM flow rate is recommended for larger vehicles such as trucks, large vans, rigid trucks and agricultural vehicles.

100LPM

The flow rate of 100LPM is suitable for vehicles equipped with large fuel tanks, such as buses, agricultural vehicles, articulated vehicles and heavy engineering vehicles.

Power supply type

Different use environments and conditions determine that you need to choose different types of power supplies for fuel transfer pumps.

1. AC type

AC 110V 230V electric fuel transfer pumps are suitable for use in places with static fuel tanks and conventional power sources, such as gas stations. Simply connect to a high voltage AC power supply and start working.

2. Dc type

For users who usually use the pump away from the gas station, it is recommended to choose a DC 12V or 24V fuel transfer pump. When the pump is connected to a vehicle battery or other 12V 24V battery, the entire fuel transfer pump package, including cables and alligator clips, can operate with ease.

3. Manual type

Manual fuel pumps are suitable for users who only need to transfer a small amount of fuel from one container to another. Manual fuel pumps are one of the most economical types of fuel transfer pumps because they require only human labor as a power source.

By taking these factors into account, you can choose the fuel transfer pump that best suits your needs, ensuring efficient and safe fuel transfer.