El papel y la importancia de la bomba de AdBlue

First, the necessity of AdBlue pump

AdBlue is a key component of exhaust gas treatment systems in modern diesel vehicles and is usually stored in dedicated tanks equipped with vehicles. In order to ensure the accurate filling and efficient delivery of AdBlue, the use of professional conveying equipment is particularly important. The AdBlue transfer pump is the core component of the filling system, its main function is to safely and accurately transfer AdBlue from the tank to the vehicle fluid storage system. Due to the special chemical properties of AdBlue, the pump must be specially designed and made of materials to ensure the reliability and durability of the system.

Second.,Classification and characteristics of AdBlue pump

AdBlue transfer pumps can be divided into the following main types according to power sources and working characteristics:

1.DC 12V/24V electric AdBlue pump

Known for its portability and ease of use, this type of pump is ideal for all types of commercial vehicles. The installation process is simple and quick, and it is equipped with a special cable and battery clip, which can be directly connected to the on-board power system. This battery-powered characteristic makes it particularly suitable for outdoor environments such as construction sites and agricultural operations to meet mobile filling needs.

2.AC 110V/220V electric AdBlue pump

These pumps need to be connected to a fixed power supply system and are suitable for gas stations or fixed filling stations with a stable power supply. The product line covers a variety of specifications and models, which can be adapted to IBC (medium bulk container), standard drums and large storage tanks.

3. Manual AdBlue transfer pump

As an economical and practical solution, hand transfer pumps are suitable for small filling needs or where the power supply is inconvenient. Its structure is simple, easy to maintain, has a high cost performance, especially suitable for small teams or temporary filling use.

Third, the material characteristics of AdBlue pump

Given the corrosive nature of the AdBlue solution, the choice of material for the delivery system is critical. Professional AdBlue transfer pumps must be manufactured in corrosion-resistant materials, typically using high-quality engineering plastics and stainless steel. Corrosive materials such as aluminum, brass or ordinary steel are strictly prohibited to ensure long-term stable operation of the system.

Fourth, the working principle of AdBlue pump

The AdBlue transfer pump uses a mechanical operating principle to achieve liquid transfer through pressure differences. The system mainly consists of the following components:

Liquid inlet: Connect the liquid storage container

Liquid outlet: Connect to the target container

Power unit: provides transmission power

Control system: adjust the transmission parameters

Workflow: After the pump body is started, the AdBlue solution is drawn by negative pressure at the inlet end, and then transported to the target container through the outlet end after pressure, so as to achieve accurate filling.

Five, AdBlue pump selection points

When selecting the right AdBlue pump, the following technical parameters should be considered:

1. Traffic parameters

Standard unit of measurement: L/min (L/min)

Selection basis: vehicle tank capacity, filling frequency, operation efficiency requirements

Note: Too low flow rate affects operation efficiency, too high flow rate may lead to overflow or foam

2. Power system selection

Power supply type: Select DC or AC power supply based on the application scenario

Portability requirements: Consider mobile filling requirements

Economic assessment: Balance initial investment with operating costs

3. System configuration scheme

Fixed installation: suitable for special filling stations

Mobile configuration: Meet multi-point operation requirements

Safety protection: Consider explosion-proof, leak-proof and other safety features

Sixth,Professional advice

As a professional manufacturer of AdBlue conveying equipment, we recommend that users fully consider the actual use needs when selecting equipment, and choose certified high-quality products. Correct equipment selection and standardized operation and maintenance can not only ensure the reliable operation of the AdBlue filling system, but also effectively extend the service life of the equipment and reduce operating costs.

For more technical information about AdBlue or professional selection advice, please feel free to contact us. Our professional technical team will provide you with comprehensive solutions and quality after-sales service.